ArcelorMittalEnWebinar series “AMRetain®” design software – Version 2 | October 2019

Webinar series “AMRetain®” design software – Version 2 | October 2019

Starting October 2019, Tuesdays 10 to 11 am (GMT+2, Luxembourg time)

This webinar is intended for design engineers with a basic knowledge about design of retaining walls, and that interested in using the software "AMRetain®". The webinars are free of charge.

October 22
  • Design of steel sheet piles: main failure mechanisms, soil behaviour, calculation, design methods and verifications.
October 29
  • Introduction to AMRetain: user interface, main features, tips, choice of optimum sheet pile section.
November 5
  • Live AMRetain Design – Case study modelling and results: cantilever wall, anchored wall according to "design approach" 2 of EN 1997 - Part 1.
November 12
  • Additional features of AMRetain – Going further…: Safety factor on soil resistance, stability of anchoring block.
Each session is independent, but we recommend to attend the 4 for a better understanding.
Registration is a must prior to attending.

Our experts

Mr João MARTINS, Civil Engineer
Mr Heiko ZILLGEN, Head of Project Engineering

Deadline for registration

October 15, 2019 for the first webinar, but you can still register afterwards.


You can register yourself below for the 4 sessions. You will receive an e-mail with the link to the online webinar platform that we use ('Skype for Business'). You just need to connect the day of the webinar using your e-mail address. You do not need to have the software installed on your computer, however, we recommend to test your connection to Skype a few days before. In case of problem, please contact us and we will try to figure out a solution:

Note: if you do not receive the confirmation e-mail within 10 minutes, it will have probably been blocked by your mail server. In that case, send us an e-mail at and we will forward you the link to Skype.
Last modified: January 15, 2020


Registration closed.