Special technical aspects
Brochures and technical documentation about installation of steel sheet piles, sealing systems (i.e. AKILA), Knife-Edge-Support, fire resistance, tie-rods, water-jetting, welding, ...
Last modified: October 21, 2022
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2019/02/AMCRPS_Installation-DE-2022_Thumb_345x405-256x300.png) |
Installation of steel sheet piles
This manual provides an introduction to the methods of installing steel sheet piles. It is a compendium of a few generations of our sheet piling [...]
|
Installation of steel sheet piles
This manual provides an introduction to the methods of installing steel sheet piles. It is a compendium of a few generations of our sheet piling specialists.
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2024/08/AMCRPS_AZ800-guidelines-2024-345x405-1-256x300.png) |
Installation Guideline - AZ-800 new generation
These 'installation guidelines' for the new AZ generation, the AZ-800 & AZ-750 steel sheet piles, contain also a brief description of the installation procedures and [...]
|
Installation Guideline - AZ-800 new generation
These 'installation guidelines' for the new AZ generation, the AZ-800 & AZ-750 steel sheet piles, contain also a brief description of the installation procedures and equipments used in several projects since their launch in 2016.
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2021/04/Brochure_Schneidenlagerung_en_2020_115_135_72dpi-256x300.png) |
Knife Edge Support
Knife Edge Support ("Schneidenlagerung") - Design of the transfer of vertical loads into a steel sheet pile according to the German National Technical Approval Z-15.6-235 [...]
|
Knife Edge Support
Knife Edge Support ("Schneidenlagerung") - Design of the transfer of vertical loads into a steel sheet pile according to the German National Technical Approval Z-15.6-235 (2021)
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2021/03/AMCRPS_Seisimic-brochure_EN_Thumb_345x405.pdf-256x300.png) |
Seismic design
Economical and safe design approaches for steel sheet piling structures in highly seismic zones.
|
Seismic design
Economical and safe design approaches for steel sheet piling structures in highly seismic zones.
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2018/12/Rockbolt_2018_115_135_216dpi-256x300.png) |
Rock Bolts
Excavations in soils with limited thicknesses of soil above the bedrock, or where the excavation level lies below the bedrock level, need additional support at [...]
|
Rock Bolts
Excavations in soils with limited thicknesses of soil above the bedrock, or where the excavation level lies below the bedrock level, need additional support at the toe. It is common practice in Nordic countries to support the toe of the sheet piles with rock bolts (also called rock dowels).
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2018/10/AMLoCor_Part_1_EN_115_135_72dpi-256x300.png) |
AMLoCor®
AMLoCor® is ArcelorMittal’s new ‘low corrosion’ steel grade that will undoubtedly revolutionize the design of port structures. A major concern of designers and port authorities [...]
|
AMLoCor®
AMLoCor® is ArcelorMittal’s new ‘low corrosion’ steel grade that will undoubtedly revolutionize the design of port structures. A major concern of designers and port authorities is the durability of marine structures like quay walls, breakwaters, jetties.
Part 1: contains general information about the new steel grade and the design approach with AMLoCor®.
Part 2: contains the steel properties and chemical composition of AMLoCor®, as well as the available sheet pile sections in AMLoCor®. Please check regularly for new updates.
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2018/03/Impervious_steel_sheet_pile_walls_115_135_72dpi-256x300.png) |
The impervious steel sheet pile wall
ArcelorMittal carried out an extensive research project in collaboration with Delft Geotechnics. The objective of the project was to determine the rate of seepage through [...]
|
The impervious steel sheet pile wall
ArcelorMittal carried out an extensive research project in collaboration with Delft Geotechnics. The objective of the project was to determine the rate of seepage through the interlocks of steel sheet piles for various joint filler materials, as well as for empty and welded joints.
This document summarizes the results to enable the designer to make a rational assessment of the seepage rate for a specific case. It contains also many details about design and practical aspects for each sealing system.
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2019/02/Akila_flyer_EN_115_135_72dpi-256x300.png) |
AKILA® Sealing System
AKILA® is an environmentally-friendly high performance sealing system developed by ArcelorMittal’s R&D department in Esch-sur-Alzette.
|
AKILA® Sealing System
AKILA® is an environmentally-friendly high performance sealing system developed by ArcelorMittal’s R&D department in Esch-sur-Alzette.
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2021/04/BeltanPlus_FR_Thumb_345x405-256x300.png) |
Beltan®Plus sealing system
Beltan®Plus sealing system is a bituminous product, for water pressures up to 1 bar (10 m).
|
Beltan®Plus sealing system
Beltan®Plus sealing system is a bituminous product, for water pressures up to 1 bar (10 m).
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2018/10/UCP_Fire_115_135_72dpi-256x300.png) |
Underground car parks: Fire resistance
This brochure deals with the design of the fire resistance of steel sheet piles in underground car parks. It considers several design assumptions, such as [...]
|
Underground car parks: Fire resistance
This brochure deals with the design of the fire resistance of steel sheet piles in underground car parks. It considers several design assumptions, such as the influence of the ventilation of the modules, the spreading of the fire from one vehicle to adjacent vehicles, a 'natural' fire curve (in contrast to the quite unfavourable ISO fire curve), the protection of steel against the heat transfer, etc.
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2018/03/AZ_Exzentrische_Verankerung_2018_115_135_216dpi-256x300.png) |
Off-centre anchoring of AZ® sheet pile walls
A cost-effective alternative to the standard anchoring system of AZ® sheet pile walls is the 'off-centre anchoring'. Advantage: no need to drill a hole through [...]
|
Off-centre anchoring of AZ® sheet pile walls
A cost-effective alternative to the standard anchoring system of AZ® sheet pile walls is the 'off-centre anchoring'. Advantage: no need to drill a hole through the interlock any more. The design method was validated by the German Institute DIBt, which issued a German National Technical Approval.
Note that the English and French version of the brochure (see below) are not up-to-date (use it only to check the details about the concept).
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2018/10/Jetting_assisted_driving_115_135_72dpi-256x300.png) |
Jetting-Assisted sheet pile driving
This document describes the improvement jetting can make to vibratory driving of sheet piles and helps understanding its effects on the surrounding soil.
|
Jetting-Assisted sheet pile driving
This document describes the improvement jetting can make to vibratory driving of sheet piles and helps understanding its effects on the surrounding soil.
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2019/02/Welding_of_ssp_115_135_72dpi-256x300.png) |
Welding of steel sheet piles
Brochure with details of welding specifications and welding procedures specific to steel sheet piles (special piles, connectors,...).
|
Welding of steel sheet piles
Brochure with details of welding specifications and welding procedures specific to steel sheet piles (special piles, connectors,...).
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2018/10/Anker_Schroeder_GB_115_135_72dpi-256x300.png) |
Anchorage - Tie-rods
The purpose of this brochure is to assist designers, contractors, engineers and buyers in choosing the best anchor material (tie-rods and accessories) to guarantee the [...]
|
Anchorage - Tie-rods
The purpose of this brochure is to assist designers, contractors, engineers and buyers in choosing the best anchor material (tie-rods and accessories) to guarantee the stability of a quay wall and other retaining structures.
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2018/03/fed3f81f80772575de2fa302909c37f1.jpg) |
Protective coating systems and applications
There are numerous types of systems available but one of the most polyvalent is the epoxy resin. Efforts and considerable investments were made in the [...]
|
Protective coating systems and applications
There are numerous types of systems available but one of the most polyvalent is the epoxy resin. Efforts and considerable investments were made in the research for the best results of epoxy polymers and today it is one of the best types of coatings adapted to the current application and performance requirements.
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2020/06/Dixeran_2020_345x405-256x300.png) |
Dixeran® declutching detector
Dixeran® is a declutching detector system for steel sheet piles, mostly used for containment walls to verify its integrity below ground level (imperviousness).
|
Dixeran® declutching detector
Dixeran® is a declutching detector system for steel sheet piles, mostly used for containment walls to verify its integrity below ground level (imperviousness).
![](https://sheetpiling.arcelormittal.com/wp-content/uploads/2018/03/47284676d8598a14a914de5605651592.jpg) |
SIZ - Stahlspundwände (1-7) - Planung und Anwendung - CD
Proceedings of the seminars organized on a yearly basis by the German Stahl-Informations-Zentrum (SIZ) on steel sheet piles. Panelists include German Professors, key design engineers [...]
|
SIZ - Stahlspundwände (1-7) - Planung und Anwendung - CD
Proceedings of the seminars organized on a yearly basis by the German Stahl-Informations-Zentrum (SIZ) on steel sheet piles. Panelists include German Professors, key design engineers and engineers from public authorities as the BAW. The main topics of the articles are relevant German projects executed with steel sheet piles, as well as innovations in design and execution. Only available in German language.