HZ 1180M A
- HZ 1180M A
| Section | Dimensions | Properties | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| h | h1 | w | tmax | tf | tw | r | It | IW | A | Gsp | Iy | Wel,y | AL | RZ/RH | ||
| mm | mm | mm | mm | mm | mm | mm | cm4 | 103 cm6 | cm2 | kg/m | cm4 | cm3 | m2/m | |||
| HZ 1180M A |
1075.4
|
- |
458
|
34.7
|
31.0
|
20.0
|
30
|
1352.9
|
124600
|
494.9
|
388.5
|
967270
|
17865
|
3.88
|
A
|
|
| h | Height of the profile (measured at the edge of the flange) |
|---|---|
| h1 | Height of the profile (measured at the middle of the flange) |
| w | Width of the profile |
| tmax | Thickness of the flange (maximum) |
| tf | Thickness of the flange (measured at w/4 from the edge) |
| tw | Thickness of the web |
| r | Radius at the intersection flange / web |
| It | Torsional constant |
| Iw | Warping constant |
| A | Cross sectional steel area |
| Gsp | Mass |
| Iy | Moment of inertia |
| Wel,y | Elastic section modulus |
| AL | Coating area |
| RZ/RH set | Set of connectors RZD/RZU/RH required (A or B) |